SPECIFICATIONS

style: Racing stripe

size: 210*11.5

Applicable place: Side body

Type 1: Car stripe

Type 2: Long side stripes

Item Type: Stickers

Type 3: Car stripe

Special Features: Body stickers

Item Type: Styling Mouldings

Item Weight: 0.25

Item Height: 210

Item Width: 11.5

Item Length: 210

Material Type: PVC

Model Name: Black,White, Red

External Testing Certification: CC

Car Side Stickers Wrap Racing Stripes For Audi Ford BMW Toyota Honda Mercedes Benz Auto Vinyl Film Body Door Accessories Decals

Product Name: Car stripe side body Decal

Features:

  100％ Brand new and high quality

  Function: Self-adhesive and removable,Temperature resistant,no shrinking,waterproof,long-term durability,decoration for your car

  Color:Black/White/Gray/Blue/Yellow/Red/Orange/Sliver

  Material:PVC

Size: 210 * 11.5CM side, shooting is the body on both sides of the complete set oh~

  Applicable for:All cars

Note:

   1.Item color displayed in photos may be showing slightly different on your computer monitor 

Package Includes:

   2×Car Side Body Decals 

Installation notes:

1. Clean the body and keep it dry.

2. In general, first tear the bottom to determine the position to be pasted, and then slowly tear the bottom paper while scraping with a tool (the tool can be bank card).

3. If the figure is not large (less than 20cm), you can also tear off all the backing paper before pasting. But we must pay attention to tear it slowly, and be careful not to stick the car stickers down or cause accidental adhesion.

4. After affixing, repeatedly scrape and press for several times, and slowly tear off the transparent transfer film.

5. Done. (do not wash the car for 2-3 days)

2, Pasting methods of medium-sized stickers (such as door stickers, map stickers, spare tire stickers, etc.):

1. Clean the body and keep it dry. (don't do it in the strong wind, rain or sun, you can choose the shelter in the garage, etc.)

2. First tear the bottom to determine the position to be pasted, and then slowly tear the bottom paper while scraping it with a tool (the tool can choose the bank card).

3. But we must pay attention to tear it slowly, and be careful not to stick the car stickers down or cause accidental adhesion.

4. After affixing, repeatedly scrape and press for several times, and slowly tear off the transparent transfer film.

5. Done. (do not wash the car for 2-3 days, two people are recommended)

3, Large car stickers:

1. The large stickers are rolled up for delivery when they are delivered. If there are some bubbles or wrinkles in the bottom paper and transfer film of the stickers, please note that this is normal and does not affect the car stickers. Before the stickers are pasted, the car stickers should be laid on a flat desktop and scraped with a scraper (bank card).

2. It is suggested to go to car beauty salon and ask for help. Choose a do it yourself buyer, suggest posting home to consult the seller. Methods: (dry or wet sticking can be used)

(1) Dry paste method: (the following method is used for the whole big paste, and the following method is not used for collage) 1. Clean the car body and keep it dry. (don't do it in the strong wind, rain or sun, you can choose the shelter in the garage, etc.)

2. First, compare the car on the car, determine the position to be pasted, and try to avoid the concave and convex or difficult position.

3. Then you can take a little tape or cut off the transfer film to fix the car stickers and start to paste.

4. First, tear off the bottom from the front of the car to determine the position to be pasted, and then slowly tear off the bottom paper while scraping with a tool (the tool can be bank card).

5. But we must pay attention to tearing slowly, not leaving bubbles, and not sticking the car stickers or causing accidental adhesion.

6. After pasting, repeatedly scrape and press for several times, and slowly tear off the transparent transfer membrane.

7. At the beginning of the later work, first cut the middle of the door with a knife (gap or opening position), and stick it inward.

8. If there are bubbles, you can try to scratch them again. The big bubbles can be broken directly. If there are small bubbles, you can wait a few days before they are fully bonded.

5. Be sure to check it again when you are finished. (don't wash the car for 2-3 days, 2-3 people are recommended)

(2) Wet sticking method - car stickers or large car stickers are applicable [it is recommended to take them to the car beauty shop] steps of wet sticking method - tools: watering can, clean rag, scraper, art knife, air duct

1. After cleaning the car body, spray water with the watering can on the body part to be pasted & mdash; & mdash; is mainly used to reduce the viscosity of the sticker and facilitate the adjustment of the position.

2. After determining the position to be pasted, remove the transfer film (transparent adhesive film pasted on the reflective sticker) and the vehicle sticker from right to left [or from top to bottom] and press them on the vehicle surface with a rag, then paste, press flat with a rag and uncover the bottom paper at the same time.

3. In case of door handle or anti-collision strip, the material shall be cut and wrapped or loaded according to the situation.

4. Adjust the general position of the figure in time, and then wipe off the water and bubbles repeatedly with the scraper. When using the scraper, scrape diagonally from right to left. Finally, tear off the transparent transfer film.

5. In case of the door and the seam, use the art knife to divide them and stick them inward.

6. Try to let the moisture in the car stickers dry completely. If possible, it can be heated and dried moderately with the air duct.

Strong requirements: do not expose to the sun within 24 hours, and do not wash the car within 48 hours.

1. Is worldwide shipping available for all products?

Yes. Thanks to customer like you, we have expanded our borders. You can now enjoy our products everywhere.

2. What are the estimated delivery time frames?

 All orders are estimated to be processed and then delivered around 7-12 business days after purchase. 

In case of uncommon logistics issues, it may take a few more business days. 

Feel safe your order is always in good hands and will make sure to be delivered safely to your address.

3. When will my order be sent out?

Orders are usually shipped 1-2 days after the payment was processed.

4. My order has not arrived yet.

If you notice your order is taking longer than expected, this is most likely due to an unforeseen logistic issue. Send email so we can provide you with further information on your order.

5. Is my payment safe?

All of our payments are managed through PayPal, one of the safest payment gateways available today. You are protected against fraud and information exposure.

6. I want to cancel my order.

Please send us an email within the first 24 hours after your purchase, only in this time frame we can make modifications to your order.

7. The product I received does not match the description. What can I do?

We are committed to customer satisfaction. Please send us a detailed email with your concern and we will get back to you as soon as possible with a solution.